MANUFACTURER OF CUSTOM FUEL TANKS
& FUEL SUPPLY SYSTEMS

INNOVATIVE + CREATIVE + SOLUTIONS

System Design Manufacturing & Installation

• Fuel oil systems
• Generator day tanks,
• Cargo tank repair + support for diesel generators & boilers.

Fuel Gard works closely with each client to effectively customize the design and fabrication of fuel oil handling and control systems that are tailored to their needs. A typical system will include day tanks, transfer pumps, fill containers, control systems, filtration systems, and tank monitoring equipment.

Smart-Tank… Our Most Sought After Solution
Available In 2 Models

MODEL 1 is the innovative solar operated fuel dispensing pump which can be operated remotely where power is not available.

MODEL 2 is the mission critical fuel system that can be monitored using the smartphone app anywhere you are in the world.

REQUEST CONSULTATION

WE'RE THE COMPANY YOU KEEP

Integrated Design Manufacturing & Installation

Our services are geared towards helping clients in mission critical facilities which include but are not limited to emergency response centers, data centers, pumping stations, hospitals, and others.

Here at Fuel Gard, we are passionate about the work we do and it shows in the quality of products and services we provide.

We are committed to delivering superior results that truly perform as expected and provide clients with many years of reliable, trouble-free service.

From start to finish, we see to it that all our efforts are consistent with what the client needs in their facility. Whether you are operating a data center, an emergency response center, or any other mission-critical facility, you can always be sure you are getting the best value for your investment when you come to the seasoned experts here at Fuel Gard.

REQUEST CONSULTATION

WE’VE GOT THIS…PROBLEM SOLVED

As a family owned and operated business, we are committed to delivering superior results that provide
our clients with many years of reliable, trouble-free service.

Deep Water Challenge

Our client had a generator storage tank in the basement of their building. The tank was located 3 stories deep in the basement which was completely flooded by hurricane Sandy.

The new tank had to be partially manufactured and delivered to work site in pieces. Once the newly constructed tanks were positioned in the new fuel storage room, the existing pumps and electronics were also replaced. Additionally, we added new technology gaining the ability to view the status of the fuel system from anywhere in the world on an iPhone.

We were contracted to set up emergency fuel for the generator while we removed fuel and existing tank since it was damaged from floatation.

CHALLENGE:

SOLUTION:

ASME Chilled Water Tanks for Data Facilities

Inspect & Detect

A newly constructed building at a major university had developed major leaks in the chilled/hot water risers that ran all the way up the 30 story structure. As the piping runs were already insulated and behind dry wall, this presented a complex challenge in order to identify and define the damage.

Our task was to find leaks so they could be repaired this was performed using helium tracer gas along with scented smoke that was sent up riser which was located using sniffers.

CHALLENGE

SOLUTION:

An Aircraft hanger fiberglass air ducting system was damaged. Water was entering the air connection sumps at a aircraft hanger. We were called to diagnose water intrusion location.

With the use of our remote tractor camera inspection system we were able to take a 360 degree view of the inside of the pipe. We located the damage caused by sheet metal screws that were screwed into the pipe. Since the pipe was buried below 24” of reinforced concrete removing damaged sections was not an option.

With our tractor we adapted our high pressure /volume graco pump sprayer to coat resin 360 degrees internally for the entire pipe run.

Lights, Camera...Solution

CHALLENGE:

SOLUTION:

Remote Generator Fueling for Cell
Tower Generator Day Tanks

Design & Build a DOT trailer mounted tank to fuel remote fuel tanks for generators that support cell towers during power outages. Tank had to be narrow to fit down access roads, DOT design rated for over the road use for Flamable/Combustable liquids. Trailer needed to be self contained unit to operate pump for filling operations.

We designed a factory packaged DOT tank and trailer assembly with gas driven 25 GPM pump sand 50’ electric hose reel with auto nozzle. Equipped with 250 watt LED site lighting for night fueling operations. This is a dual function unit which allows fueling and defueling/polishing of fuel in their tanks. Unit is totally enclosed and lockable.

CHALLENGE

SOLUTION:

ENVIRONMENTALLY FRIENDLY, DURABLE & BUILT TO LAST

Over 20 Years Experience

At Fuel Gard, we have over 20 years of proven excellence and unmatched reliability in design, fabrication, and installation of fuel oil systems.

Family Owned & Operated

As a family owned and operated business, we are committed to delivering superior results that provide our clients with many years of reliable, trouble-free service.

Custom Fabrication

Here at Fuel Gard, we enjoy the challenge of designing, fabricating, and installing systems that successfully meet all our clients’ needs.

LET'S TALK

Fuel Gard is a family owned and operated business, we are the leading authority offering design, manufacturing and turnkey installation of fuel oil systems, generator day tank’s, cargo tank repair, aviation fueling skids, and other related products for the petroleum industry.

Our Clients Say It Best!

“We had a out of date generator and fuel system from the ‘80’s, They installed a state of the art Fuel Gard fuel system that is accessible from anywhere in the world!! It was a pleasure dealing with one company to deliver everything turn-key! Brilliant design with a on time delivery!”

Jane S.
“Had a old fuel tank in the basement only accessible via a freight elevator. They not only removed the tank, but build a new double wall tank in place!! Very impressive and professional workmanship.”

Jack F.